FIND THE UNIT FOR YOUR APPLICATION ~~~>
MONITORS AVAILABLE BY GAS NAMEAMMONIA (NH3)
Portable Units
- Ranges of 0-100 ppm or 0-1000 ppm - Multi-gas unit that simultaneously monitors, displays, and alarms for one to four gases with many different interchangeable, 'smart' electrochemical sensors available. These units are housed in an ultra durable case that is virtually unbreakable, highly water resistant, dust proof, and RF resistant. This is the only unit that would float if dropped accidentally in water! The large digital display with backlight shows the levels of the gases and the push button menu for the advanced microprocessor's features which is password protected. There is the option of a built-in air pump, internal datalogger, and more. - Ranges of 0-100 ppm or 0-1000 ppm - These new, portable multi-gas monitors are offered for several different gas sensor configurations with advanced features at a very low price. One large button is used for easy operation with an auto zero self check function when switched on. All units come standard with a large LCD backlight display, internal datalogger, built-in air pump (or diffusion option), internal vibrating alarm, rechargeable Li-ion battery pack and charger (or optional Alkaline battery pack). Optional software package allows for full configuration control, user calibration, and access to the Event log file. - Ranges of 0-100 ppm or 0-1000 ppm - These single gas, personal size monitors replaced the original Gasman (1991-2000) and Gasman II (2000-2009) units. This version is the lightest and lowest cost but is also the most advanced, flexible, durable, and compact! Each unit offers easy one button operation, a large backlit digital display, peak hold, IP65 & IP67 water and dust protection, with multiple levels of built-in audio, visual, and vibrating alarms including TWA in toxic versions. Replaceable batteries last up to two years in oxygen and toxic versions. Rechargeable batteries and a charger are used for combustible versions. There is no built-in air pump but each unit comes standard with a flow cap and internal event logging with optional communication software. - Ranges of 0-100 ppm to 0-5000 ppm - Unique, patented sensors are utilized that are unaffected by moisture, temperature change, or poisons. Units are available for many different common or exotic gases in low levels for leaks or in very high measuring ranges that most or no other gas monitors can handle. All units are equipped with adjustable audio/visual alarms. The portable version has the sensor attached to the end of a probe connected by cable to controller unit with choice of analog or digital display. There is no built-in air pump or internal datalogger option. - Ranges of 0-2% to 0-100% Volume - The new SB1000 & SB2000 are low cost, self-contained portable and wall mounted analyzers that utilize single beam infrared technology to provide high selectivity, excellent sensitivity, and repeatability. One optional internal electrochemical sensor for Oxygen, Hydrogen Sulfide, or another toxic gas in PPM levels can also be installed in any unit. These single gas analyzers then become dual gas analyzers. The resolution and accuracy is about 1% resolution of full scale for any of the sensors in these analyzers.
Wall Mounted Units
- Ranges of 0-50 ppm to 0-1000 ppm - The Xgard Series are remote toxic, Oxygen, and combustible gas detectors that use the latest sensor technologies and come in a variety of different types for extreme flexibility at a low price. These are the best choice for every application except that there are no Xgard types currently offered with local digital display or contact relays. If you must have either of these options at the remote sensor itself, then you would choose the TXgard Series or Flamgard Series assuming it is available for that gas and range. All of the Xgard types can be connected and powered by the Gasmaster Series of single and multi-channel control units. The Gasmaster Series offers digital display, built-in battery back-up, continuous output signals, common and individual dual level alarms, relay contacts, and can be used with most other remote sensors that transmit a 4-20 mA signal. - Ranges of 0-50 ppm to 0-1000 ppm - The TXgard Series are remote toxic and Oxygen gas sensors with local digital display and a built-in amplifier/transmitter that transmits a linear 4-20 mA output signal. The TXgard-IS+ is Intrinsically safe and lightweight. The TXgard-Plus is explosion proof and is available with optional built-in relays as the TXgard-Plus With Relays. The TXgard Series can be used with any controllers or PLC that can interpret a 4-20 mA output signal when between 10-30 VDC power is provided. All of these can be connected and powered by the Gasmaster Series of single and multi-channel control units. The Gasmaster Series offers digital display, built-in battery back-up, continuous output signals, common and individual dual level alarms, relay contacts, and can be used with most other remote sensors that transmit a 4-20 mA signal. - Range of 0-100% LEL - The Flamgard Series are remote combustible gas sensors with local digital display and a built-in amplifier/transmitter that transmits a linear 4-20 mA output signal. The Flamgard-Plus is explosion proof and is available with optional built-in relays as the Flamgard-Plus With Relays. The Flamgard Series can be used with any controllers or PLC that can interpret a 4-20 mA output signal when between 10-30 VDC power is provided. All of these can be connected and powered by the Gasmaster Series of single and multi-channel control units. The Gasmaster Series offers digital display, built-in battery back-up, continuous output signals, common and individual dual level alarms, relay contacts, and can be used with most other remote sensors that transmit a 4-20 mA signal. - Ranges of 0-50 ppm to 0-200 ppm - Digital display wall mounted controllers with one to four remote sensors for detecting, alarming and controlling toxic or oxygen leaks quickly by using proven electrochemical sensor technology. There are displays and audio/visual alarms on the controller provided for each remote sensor with accompanying internal relay contacts. The controller and remote sensors are enclosed in a NEMA 4X fiberglass enclosure. These units are easy to install and operate. - Range of 0-50 ppm - Single gas, non-display, all-in-one sensor/controller wall mounted units for continuous monitoring toxic or oxygen leaks enclosed in a NEMA 4X fiberglass enclosure. A green LED confirms that the unit is functional. Two alarms are provided, with each indicating a specific concentration of gas with audio and visual indications and internal relay contacts. This unit is extremely easy to install and use with low maintenance. The alarms can be tested, silenced, and reset remotely by shining a flashlight on the front panel. - Ranges of 0-100 ppm to 0-5000 ppm - Unique, patented sensors are utilized that are unaffected by moisture, temperature change, or poisons. Units are available for many different common or exotic gases in low levels for leaks or in very high measuring ranges that most or no other gas monitors can handle. All units are equipped with adjustable audio/visual alarms. The wall mounted versions have a contact relay as standard and are available in single or multi-channel configurations. The electrical classification of the remote sensors is explosion proof under Class 1, Division 1, Groups B, C, and D hazardous atmospheric areas and can be wired up to 2000 feet away. Recorder outputs and dual alarms are available. - Ranges of 0-100 ppm to 0-5000 ppm - The same exact, patented sensors as in the Series U are used but in the explosion proof housing is a built-in amplifier/transmitter. These stand alone units only need 12 VDC, 24 VDC, or AC power and will continuously transmit a linear 4-20 mA signal to any existing controllers or PLC that can interpret these signals. Digital display is the only available option since there are no alarms, relays, or other types of outputs available with these units. - Ranges of 0-2% to 0-100% Volume - The new SB1000 & SB2000 are low cost, self-contained portable and wall mounted analyzers that utilize single beam infrared technology to provide high selectivity, excellent sensitivity, and repeatability. One optional internal electrochemical sensor for Oxygen, Hydrogen Sulfide, or another toxic gas in PPM levels can also be installed in any unit. These single gas analyzers then become dual gas analyzers. The resolution and accuracy is about 1% resolution of full scale for any of the sensors in these analyzers. - Ranges of 0-2% Volume to 0-100% Volume - Single or multiple gas analyzers that use advanced Infrared and several other field proven technologies to analyze up to four gases at once. These units with built-in air pumps can be used in hostile or friendly environments. The option to upgrade at a later time protects your initial investment. A robust, attractive, compact 3U rack mount enclosure houses the unit with an optional bench case available for non-rack mounted applications. Many different gases from low ppm to 100% Volume levels can be analyzed and monitoredFIND THE UNIT FOR YOUR APPLICATION ~~~>
MONITORS AVAILABLE BY GAS NAME